Rapid Deployment, Blade Structure, Modular Design Blade Power
Introduction
Distributed Blade Power supply is a new generation of distributed power supply solutions designed specifically for terminal sites. The utility model has the advantages of easy installation, easy expansion, maintenance-free, flexible power supply, etc. The utility model is mainly applied to the AC / DC power supply and backup scenarios such as Easy Macro, indoor RRU, outdoor RRU, etc.
Features
- Rapid Deployment, blade structure, Modular design
- Flexible design, Power Unit and Battery Power Support Modular Expansion
- Simple operation and maintenance, natural heat dissipation, free from daily maintenance
- High environmental adaptability, IP65 protection grade, wide temperature range -40°C ~ + 55°C
Scenarios
- Indoor / outdoor distributed site
- RRU site
- Easy Macro site
- LampSite site
Operating Conditions
| Voltage Range |
110/220VAC (80VAC - 300VAC); 240/336VDC (130VDC - 400VDC) |
| Frequency Range |
50/60Hz (45Hz - 66Hz) |
| AC SPD |
20kA (8/20µs) |
| Input Power Factor |
≥0.99 (100% load) |
| Rated Output Power |
3000W at 200VAC |
| Rated Output Voltage |
54.5VDC |
| Efficiency at 220VAC |
≥96% (peak); ≥95.5% (load) |
| DC SPD |
10kA (8/20µs) |
| Load Output Branch |
4 channels (1 channels high-power quick-plug terminals, 60A per channel, 3 channels quick connect terminal output interface, 40A per channel) |
| Operating Temperature Range |
-40 ~ +55°C (Non-solar radiation) |
| Storage Temperature Range |
-45 ~ +70°C |
| Relative Humidity |
5% ~ 95%RH |
| Dimensions (W x D x H) |
98mm x 309mm x 415mm |
| Weight |
9.2kg |
| Alarm |
Input undervoltage, input overvoltage, overtemperature, output overvoltage, etc. |
| Heat Cooling |
Natural heat dissipation |
| MTBF |
5 x 105 hours |
| IP Level |
IP65 |
| Installation Mode |
Pole or wall-mounted |
| Wiring Method |
From the bottom |
| Communication |
RS485/CAN/Bluetooth/4G |
Product Tags:
|
|
110VAC 50Hz Blade Battery 3000W 54.5VDC Wall Mounted RS485 Communication Images
|
